H a n n S t a r D i s p l a y C o r p .
Document Title
Document No.
5. Operating Instructions
5.1 General Instructions
Press the power button to turn the monitor on or off. The control buttons are located in the front of the monitor.
By changing these settings, the picture can be adjusted to your personal preferences.
The power cord should be connected.
-
Connect the video cable from the monitor to the video card.
-
Press the power button to turn on the monitor, the power indicator will light up.
-
5.2 Control Buttons
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed,distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HQ171D_XY _HSM
Page No.
9 9 / 87
Revision
07/08/09