HannStar HQ171D Service Manual page 61

H a n n S t a r D i s p l a y C o r p .
Document Title
Document No.
Click to complete the installation.
3. Connect the DDC board as follow:
(Take philips 190B8 for example)
When you write analog
EDID, Connect this port
to the Philips 190B8's
VGA port
12V Input
Note: Pin5 of the VGA cable which connects to the monitor should be cut off.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed,distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HQ171D_XY _HSM
61 61 / 87
Page No.
Revision
07/08/09
Connect to the
PC LPT
When you write digital
EDID, Connect this port
to the Philips 190B8's DVI
port