Subaru 2003 LEGACY Service Manual page 12

6) Install the camshaft sprocket.
<Ref. to ME(H4DOSTC)-55, INSTALLATION,
Camshaft Sprocket.>
7) Install the timing belt assembly.
<Ref. to ME(H4DOSTC)-49, INSTALLATION, Tim-
ing Belt Assembly.>
8) Install the belt cover.
<Ref. to ME(H4DOSTC)-46, INSTALLATION, Belt
Cover.>
9) Install the crankshaft pulley.
<Ref. to ME(H4DOSTC)-44, INSTALLATION,
Crankshaft Pulley.>
10) Install the V-belt.
<Ref. to ME(H4DOSTC)-42, INSTALLATION, V-
belt.>
C: DISASSEMBLY
1) Remove the valve shims and valve lifters.
2) Compress the valve spring and remove the
valve spring retainer key. Remove each valve and
valve spring.
ST1 498267600 CYLINDER HEAD TABLE
ST2 499718000 VALVE SPRING REMOVER
NOTE:
• Keep the removed parts in order for re-installing
in their original positions.
• Mark each valve to prevent confusion.
• Use extreme care not to damage the lips of the
intake valve oil seals and exhaust valve oil seals.
ST2
ST1
CYLINDER HEAD ASSEMBLY
ME-00124
ME(H4DOSTC)-63
MECHANICAL