Estimated Assembly/Set-Up Time; Required Tools; Before You Begin - Razor MX350 15128050 Owner's Manual

BEFORE YOU BEGIN

Remove contents from box. Remove the foam separators that protect the components from damage during
shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have
occurred during shipping. Because the Dirt Rocket was 95 percent assembled and packed at the factory,
there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 30 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 3 for charging information).
Front Fork
Wheel
Tire
Drive
Chain

Required Tools

Some tools may be supplied; however, we recommend the use of mechanic's grade tools. Use the supplied tools only as a last resort.
2.5mm, 4mm and 5mm
hexagonal key wrenches
(included)
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call toll-free
at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Rear Brake Lever
Brake Lever
Adjuster
Back Brake
Adjuster
Front Brake Lever
(MX500 & MX650 Only)
Wrenches Screwdriver
(included) (included)
Charger
Charger
Port
Charger
Plug
Speed Control
Spoke tightener
(Included)
2
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR RAZOR
DIRT ROCKET. The Dirt Rocket
has been built to certain Razor
design specifications. The
original equipment supplied at
the time of sale was selected
on the basis of its compatibility
with the frame, fork and all
other parts. Certain aftermarket
products may or may not be
compatible.
Bicycle-style tire pump for
Schrader valve tires, with
pressure gauge