Assembly And Set-Up - Razor Dirt Rocket MX500 Owner's Manual

asseMBly anD seT-up

attaching the Handlebars
1
Place the handlebars in
the handlebar clamps.
Note: Handlebar clamps are
located in the plastic bag.
q attaching the front fender
1
Align fender with the hole
in the fork and insert the
bolt. Tighten securely using a
10mm open wrench and 5mm
Allen wrench.
q attaching the number plate
1
Remove screw from front
fork. Align the number plate
with the hole in the fork and
tighten with a Phillips screw-
driver.
need Help? Visit our website for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
2
Align parallel to the fork and
tighten the bolts using a 6mm
Allen wrench. When properly
tightened, the handlebars should
not move forward or back.
3
Adjust the brake lever
adjuster to the proper place
and tighten it with the 5mm
Allen wrench.
3