Table of Contents
Advertisement
Before installation
Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
The veneer or laminate
coatings of worktops (or
adjacent kitchen units) must be
treated with 100 °C heat-
resistant adhesive which will not
dissolve or distort. Any
splashbacks must be of heat-
resistant material as well.
The CombiSet must not be
installed over a fridge, fridge-
freezer, freezer, dishwasher,
washing machine, washer-dryer
or tumble dryer.
Induction CombiSets must not
be installed above ovens unless
these have a built-in cooling fan.
After installation, the
connection cable must not come
into contact with any moving
kitchen component (e.g. a
drawer) or be subject to
mechanical obstruction which
could damage it.
Observe carefully the safety
clearances listed on the following
pages.
All dimensions in this instruction
booklet are given in mm.
Assembly parts
1 fixing plate and
2 screws 4 x 15 mm
for securing the downdraft extractor to
the furniture cabinet.
Installation
23
Hide quick links:
Advertisement
Table of Contents
