The QuickLock Padlock Manual page 10


You can set the amount of time the Padlock latches stays open after it is unlocked. To do this, press "Auto Lock
Time," and change the number of seconds.
RFiD Tag Management

RFiD tags can be added to the Padlock using the App. To do this, press "RFID Tag Management" to get to the
RFID Tag Management screen and then press "Add New Tag." The blue LED on the Padlock will begin to flash
and the App will display the message, "Place a New RFiD Tag on the Lock to Add it." Within 5 seconds, place an
RFID Tag/Card directly in front of the Q-Logo to record that tag. The blue LED will flash rapidly to indicate that
the card has been recorded to the Padlock. The RFID tag will also appear on the RFID Tag Management screen.
A name can be added next to the Authorized TagID each time an RFiD tag is added. The App will indicate "time
out" on the bottom of the screen if the tag was not read in time. To remove a tag, press the "-" sign in the
Delete column next to the tag you wish to remove and press "Yes" when the Warning screen comes up on the
App.