Related Manuals for Ginnys 726925
Summary of Contents for Ginnys 726925
-
Page 1: Ice Maker
BRAND ICE MAKER User Guide Item: 726925 Ginnys.com • 800-544-1590 Facebook.com/GinnysBrand Pinterest.com/GinnysBrand Ginnys.com/Blog... -
Page 2: Table Of Contents
Enjoy! ____________________________________________________________ ____________________________________________________________ TABLE OF CONTENTS Important Safeguards Electrical Safety and Specifications Get to Know Your Ice Maker How to Operate Cleaning & Care Troubleshooting 10-11 Warranty Ginnys.com 800-544-1590... -
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS READ CAREFULLY BEFORE USING AND SAVE THESE INSTRUCTIONS! • FOR HOUSEHOLD USE ONLY. Do not use this appliance for other than its intended use. • REMOVE all packaging materials and labels before first use. • WASH all removable parts before first use. See INITIAL CLEANING on page 7 for in-depth instuctions BEFORE MAKING ICE. -
Page 4: Electrical Safety And Specifications
ELECTRICAL SAFETY This appliance is equipped with a three-prong grounding plug. This is a safety feature to reduce the risk of electrical shock. Using an extension cord is not recommended with this appliance. It is recommended that an electrical outlet serving ONLY this appliance be used. This outlet must be properly installed and grounded. -
Page 5: Get To Know Your Ice Maker
5. Evaporator Rods (where the ice is formed) 6. Water Tray 7. Control Panel (see page 6) 8. Top Cover 9. Lid 10. Window 11. Scoop 12. Power Cord 13. Compressor 14. Ice Sensor (determines when basket is full) (continued on next page) Ginnys.com/Blog... -
Page 6: Get To Know Your Ice Maker
This light will turn on along with a continuous beeping sound when the water level is too low. Fill with water, wait 3 minutes and press ON/OFF to restart. When the water reaches the fill line, the icemaker will restart automatically. Ginnys.com 800-544-1590... -
Page 7: How To Operate
HOW TO OPERATE Note: Find a location for your ice maker that is protected from direct sunlight and other sources of heat — stove, furnace, radiator, etc. Place the ice maker on a level surface and ensure there is at least 8” of space between walls or cabinets and the back, sides, and top of unit. -
Page 8: How To Operate
HOW TO OPERATE MAKING ICE: Note: This machine normally produces 9 pieces of ice with each cycle. Expect it to take 20 minutes for the first cycle. After that, it should take approximately 10 minutes per cycle. For the first 3 cycles, the ice may be small and irregular in size. -
Page 9: Cleaning & Care
9. When the ice maker is not in use, or is being stored, ensure the reservoir is completely dry to keep mold from forming. Store with the drain stopper open. 10. As needed, follow the vinegar and water cleaning instructions on page 7 to keep your ice machine functioning properly. Ginnys.com/Blog... -
Page 10: Troubleshooting
Press ON/OFF, allow a few minutes for the machine to restart automatically. Machine keeps running, The magnetic valve is Call customer service. but the water is broken warmer than the normal temperature Ginnys.com 800-544-1590... - Page 11 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Ice maker is leaking The drain stopper may Check the drain liquid not be inserted stopper. properly Pipe in the cooling Call customer service. system is blocked Refrigerant liquid Call customer service. leakage There is not enough ice The room temperature Room temperature in the ice basket, but...
-
Page 12: Warranty
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THOSE OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE. Ginny’s, Inc. 1112 7th Avenue Monroe, WI 53566 Customer Service: 800-544-1590 8:00 a.m. to Midnight CST, Monday through Friday Ginnys.com 800-544-1590...