Deactivate Valet Mode - Sprint Booster v3 Ultimate Control User Manual

Deactivate Valet mode

In order to deactivate the Valet mode :
Press the 2 Arrow buttons simultaneously for 3 seconds.
Press 2 arrow buttons
simultaneously for 3
seconds
st
1 dash is blinking
To enter 1
st
The 1 digit of your PIN is now stored. Repeat the same procedure to
nd
store the 2 and 3
rd
3 digit of your pin the Valet mode will be deactivated and
twice . Then the device will exit the MENU and will go back to Off mode.
In case you enter a wrong PIN the 1
PIN again.
Press arrow to choose
1st digit of PIN (0-9)
st
digit of PIN
rd
digit of your PIN. After you enter successfully the
Valet mode
3 ''
st
dash will start blinking to enter the
The lower dash
will start blinking
to enter PIN.
Press SET to store
st
1 digit of PIN.
will blink