Exit The Menu - Sprint Booster v3 Ultimate Control User Manual

As soon as you store the third digit of your pin the
LED display for 10 seconds. After this time the
will remain ON. During the time the
To cancel the lock by pressing any of the 3 buttons on the
Selector switch. If you press any button during the time it's blinking,
the lock will be canceled and the LED display will exit the MENU.
Once the stops blinking , the acceleration can only be enabled with
the 3 digit PIN (
While navigating through the MENU if none of the buttons are
pressed within 10'' the device will cancel the procedure and

EXIT the MENU.

Don't press the pedal while activating the Pedal Lock mode.
If the accelerator pedal is pressed while entering the PIN, the
device will cancel the procedure and EXIT the MENU.
Pedal Lock mode should only be accessed when
Pedal Lock mode
14 ) .
Never enter the Pedal Lock mode MENU while
vehicle is parked/stationary.
is blinking you have the option
driving.
will blink on the
will stop blinking and