Optional Boiler Monitor Control; Field Wiring - Single Boiler - Raypak B6000 Installation And Operating Manual

OPTIONAL BOILER MONITOR
• Wiring
• Contact Authorized Raypak representative for other wiring options
NOTE: Tighten terminal strip
clamping screws 20 lbs - In
(2.26N.m) Breakage from over
torquing is not covered under
warranty.
Use copper conductors only.
For supply connections use
wires sized on the basis of 60°C
Ampacity and rated Min. 90°C
(194°F).

Field Wiring - Single Boiler

Dia. #7
Page 18
Dia. #2