Operation Mode - abc COMBO 25 Instructions For Use Manual

5.1 Combustion power settings
Combustion power can be set via this menu. Setting mode may be manual or
automatic. In the first case the user sets the power by himself, while in the other the
system sets the combustion power in relation to the defined temperature.
Pellet: 1-2-3-4-5-Auto
Wood: 0-1-2-3-4-5-Auto
5.2 Thermostats
These are used to adjust the set temperature in the boiler and/or "Buffer", if installed.
"Buffer"-thermostat is visible only if P26=1 and P42=1

5.3 Operation mode

This menu enables the user to choose the boiler operation mode: pellet or solid fuel.
Changing the operation mode is possible only when the boiler is turned off.
5.4 Recipe
This menu is visible only when the boiler operation mode is "pellets" and the recipe
change is not allowed.
Only "Pellet recipe" 1 is available.
5.5 Chrono
It is used to set the time of ignition and shutdown of the boiler. Press the button P3
to enter the menu.
4