Hoshizaki B-1150SS Instruction Manual page 13

2. Sliding Doors
a) Removal
1) Slide the door you want to remove to the middle of the opening. See Figs. 4a and 4b.
2) Raise the door up slightly. If it cannot be easily raised, slide it gently back and forth
while lifting until it raises.
3) Rotate the bottom of the door out for the front door or in for the rear door. Pull the door
down slightly and remove.
b) Installation
1) There is a vertical ridge on one side of each door. This ridge should face the rear on the
front door and the front on the rear door.
2) Place the top of the door into the appropriate track in the middle of the upper opening.
The top of the door should fit into three keyways.
3) Rotate and lower the bottom of the door into the track.
1
2
3
Front Sliding Door Removal
Fig. 4a
2
Rear Sliding Door Removal
13
1
3
Fig. 4b