Hoshizaki B-1150SS Instruction Manual
Hoshizaki B-1150SS Instruction Manual

Hoshizaki B-1150SS Instruction Manual

Ice storage bin
Hide thumbs Also See for B-1150SS:

Advertisement

Quick Links

Instruction Manual
Ice Storage Bin
Models
B-1150SS
B-1300SS
B-1500SS
B-1650SS
hoshizakiamerica.com
Issued: 2-15-2005
Revised: 4-10-2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B-1150SS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hoshizaki B-1150SS

  • Page 1 Instruction Manual Ice Storage Bin Models B-1150SS B-1300SS B-1500SS B-1650SS hoshizakiamerica.com Issued: 2-15-2005 Revised: 4-10-2018...
  • Page 2 WARNING Only qualified service technicians should install and service the ice storage bin. To obtain the name and phone number of your local Hoshizaki Certified Service Representative, visit www.hoshizaki.com. No installation or service should be undertaken until the technician has thoroughly read this Instruction Manual.
  • Page 3: Table Of Contents

    IMPORTANT Read this manual carefully before installing and using the ice storage bin. Observe the warnings and guidelines contained in this manual, as they provide essential information for the continued safe use and maintenance of the ice storage bin. Retain this manual for future reference. CONTENTS Important Safety Information ....................
  • Page 4: Important Safety Information

    Important Safety Information Throughout this manual, notices appear to highlight attention to situations that can result in death, serious injury, and damage to the ice storage bin or property. WARNING Indicates a hazardous situation that can result in death or serious injury.
  • Page 5 NOTICE • Follow the drain connection and maintenance instructions carefully to reduce the risk of costly water damage. • In areas where water damage is a concern, install the ice storage bin in a contained area with a floor drain. •...
  • Page 6: Specifications

    I. Specifications A. Dimensions/Connections 1. B-1150SS, B-1300SS, B-1500SS, B-1650SS Units: mm [in.] Fig. 1...
  • Page 7: Installation And Operating Instructions

    B. Checks Before Installation NOTICE The ice storage bin is designed and intended for use in combination with a Hoshizaki modular or stackable icemaker. If used with another manufacturer's icemaker, care must be taken to properly support and secure the icemaker in accordance with the manufacturer's recommendations.
  • Page 8: Setup

    5) A top cover is provided. Use and position as necessary depending on your application. If required, install an adapter kit or top kit. Contact your local Hoshizaki distributor for recommendations. 6) Remove the snout assembly from the box.
  • Page 9 Gasket Top Cover (cut to match application) Gasket Washers Screws Snout Assembly Fig. 1...
  • Page 10: Drain Connection

    D. Drain Connection See Fig. 2 WARNING Drain connection must be installed in accordance with applicable national, state, and local regulations. Ice Storage Bin Drain Outlet Minimum Ice Storage Bin Drain Line Size 3/4" Female Pipe Thread (FPT) 3/4" Nominal ID Hard Pipe or Equivalent •...
  • Page 11: Final Checklist

    E. Final Checklist WARNING CHOKING HAZARD: Ensure that all components, fasteners, and thumbscrews are securely in place after installation. Verify that nothing has fallen into the ice storage bin. 1) Is the ice storage bin level? 2) Is the ice storage bin in a site where the ambient temperature is within 45°F to 100°F (7°C to 38°C) all year around? 3) Is there at least 6"...
  • Page 12: Usage Instructions

    F. Usage Instructions 1. Baffle The baffle prevents ice in the ice storage bin from flowing out onto the floor while the ice storage bin door is open. a) Removal 1) Rotate the back edge of the baffle up about 6 in. (15 cm). 2) Pull the baffle forward.
  • Page 13 2. Sliding Doors a) Removal 1) Slide the door you want to remove to the middle of the opening. See Figs. 4a and 4b. 2) Raise the door up slightly. If it cannot be easily raised, slide it gently back and forth while lifting until it raises.
  • Page 14 3. Probe (Optional Accessory) The probe is used to break apart ice when it has bridged inside the ice storage bin and will not flow into the snout. To break apart ice, follow the steps below. 1) Open the ice storage bin door. See Fig. 5. 2) Insert the probe through the hole in the snout.
  • Page 15: Maintenance

    1. Cleaning Procedure 1) Turn off the icemaker power supply. 2) Remove all ice from the ice storage bin. 3) Dilute 5 fl. oz. (148 ml) of Hoshizaki "Scale Away" with 1 gallon (3.8 l) of warm water.
  • Page 16 4) Scrub the ice storage bin door, the snout, the baffle, the sliding door assembly, and the inside of the ice storage bin using a nylon scouring pad and the cleaning solution from step 3. See Fig. 6. 5) Rinse all areas thoroughly with clean water. 2.
  • Page 17: Preparing The Ice Storage Bin For Periods Of Non-Use

    IV. Preparing the Ice Storage Bin for Periods of Non-Use NOTICE When storing the ice storage bin for an extended time or in sub-freezing temperatures, follow the instructions below to prevent damage. 1) Prepare the icemaker for long storage and turn off the icemaker power supply. See the icemaker instruction manual for details.
  • Page 18 618 Hwy. 74 South, Peachtree City, GA 30269 USA (P) 770.487.2331 (F) 770.487.3360 hoshizakiamerica.com 1A4162-011...

This manual is also suitable for:

B-1300ssB-1500ssB-1650ss

Table of Contents