Electrical Specifications - Raymarine RAY 210VHF Operation Manual

1.3 SPECIFICATIONS
Appendix 1 : Design Specification Model RAY210
General : FCC Part 80, ITU Radio Regulations Appendix 18.
DOC CAT V RSS-18 Issue 2.

1.3.1 Electrical Specifications;

Transmitter
Channel
Frequency Stability
Channel Spacing
Power Output
Modulation
Modulation Audio
Hum & Noise Level
Audio distortion
Spurious & Harmonic
Antenna Impedance
Receiver
Channel
Frequency Range
Frequency Stability
Sensitivity
Squelch Sens. Threshold
Tight Squelch Sens.
Adjacent CH Rejection
Spurious Image Rejection greater than 70dB
Intermodulation Rejection greater than 70dB
Audio Output
Hum & Noise
Operating Requirement
Input Voltage
Current Required for
Transmit
Operating Temperature
51 USA /International
+/-5ppm(+/-0.0005%)
25KHz Increment
25Watts Switchable to 1 Watt
into 50 ohm at 13.6 Vdc.
Frequency Modulated 16F3
(+/-4.5KHz at 1000Hz)
within the limit of +/-3dB at
6dB/oct freq. curve (300-2.5KHz)
Greater than 40dB below audio
less than 10% at 1KHz for +/-
3KHz deviation
greater than 70dB below carrier
power.
50 ohms
93 (Includes 10 WX Channels)
156.025 to 163.275MHz in
25KHz increments
±5ppm (±0.0005%)
–20degree C to +50degree C
0.3µV for 12dB SINAD
0.2µV or better
1µV
greater than 70dB
4 Watts @ 4 ohms with Less
than 10% distortion
greater than 40dB
13.6 Vdc ±15% (11.6 to 15.6Vdc)
Less than 5.5 A at 25 Watts
Less than 1.3 A at 25 Watts
–20º C to +50º C
3