Page 1
. It’s the responsibility of the employer to ensure this manual is read by the operator. is read by the operator. Scaler Please preserve this manual. This document issued with Model No Product Serial Number & are trademarks of Teryair Equipment Pvt. Ltd.
Electric Electric Needle Scaler. Ensure that job site is clear of bystanders. Caution Use only genuine Teryair or Teryair approved accessories. Warning This Electric Needle Scaler is not designed for use in an explosive environment environment.
Page 3
Caution Completely turn off the Electric Needle Scaler and disconnect electric supply line before attempting supply line before attempting any service. Read Assembly and Disassembly instructions. Warning Take must be taken to select correct power supply as per model. Caution Do not exert excessive pressure against the work surface.
Page 4
Intended and Prohibitive use Intended use Removal of Coatings. Hold cleaning, general deck and surface cleaning, removal of heavy rust on tankers and dry dock Hold cleaning, general deck and surface cleaning, removal of heavy rust on tankers and dry dock applications .
Scalers are rugged dependable tools designed to give you years of satisfactory service. Follow the of satisfactory service. Follow the instructions mentioned here to enhance life and performance of your scalers. Use genuine Teryair spares and if possible mention the serial number of the Electric Electric Needle Scaler when ordering spares.
Maintenance Disconnect the plug & switch off power supply from the source. Needle Replacement First remove the Lock (14). Now rotate the front cover (4) counter clockwise. Now slide out the needle supporter (13) along with needles (12) and spring (11). Now slide out the needle supporter (13) along with needles (12) and spring (11).
Page 7
Exploded view ENS100V and ENS200V Illu. Part Qty. Illu. Qty. Description Part number Description Description number ENS100V ENS200V ENS100V ENS200V 022 90 13 Safety Band Safety Band 655 91 01 Motor housing – 100V 655 21 06 Spacer 655 91 02 Motor housing – 200V...