Chart Speed Setting - Raymarine L365 Instruction Manual

Figure 4-4 shows how the chart speed setting affects the display. In both
cases, the unit is showing the same section of the bottom. Using a faster
chart speed, the display has more space on the display to show this
section, so it can include more detail. Using a slower chart speed, this
same information is displayed in a smaller horizontal space.
A faster chart speed setting shows more detail on the bottom. You will
probably want to use a faster setting when you are looking for fish.
A slower chart speed setting shows a longer record of the bottom you
pass over. Any fish detected will stay on the display longer.
From the display for the sensitivity setting, press the
control pad. The next menu item will allow you to set the chart speed.
See Fig. 4-5.
Chart speed This adjusts the speed at which the information moves
across the display. Use the
control pad to change the chart speed. Making the bar
longer increases the chart speed. If you move the bar
all of the way to the left, the FishFinder will "freeze" and
hold the current display. (The depth indicator will
continue to update.)
If you are done with your setup changes, press the
to the normal display. To select the next menu item, press the
the Page control pad.
Setup Instructions
arrow of the Page
V
< >
and arrows of the Page
Fig. 4-5
Chart Speed
Setting
button to go back
CLEAR
arrow of
V
51