Before you connect anything, make sure that your system is disconnected from power. Also double
check the polarity of the ribbon cable, the red cable should match the 12V rail both on the module and
on the bus board!
TROUBLESHOOTING
First check out the
D IY F.A.Q.
If you are having some more trouble, the best thing is to take a nap! Especially late at night!
If you are still in trouble you can send the detailed description of the problem with enclosed
highresolution photos on
If you think that you are unable to make the module work on your own, consider our "
service.
d iy@bastlinstruments.com
.
7
C ome to Daddy
"