SM385CH indoor monitor operation guide
System startup
Before turn on the power, make sure the indoor monitor is
connected correctly. Then turn on the power switch on the bottom
of the indoor monitor. Picture 1-1 is the startup screen. Startup
requires 40 seconds. Main interface is as picture 1-2. The screen
server will be activated if no operation in 30 seconds. After 3
minutes screen saver mode, the machine will activate the power
saving mode.
picture 1-1
Main menu interface
After the system startup is successful, or the indoor monitor is in
the standby mode, press any button, the screen will show the main
menu as picture 1-2. There are video chat, monitor, home security,
message check, user setting, system setting.
-9-
System setting
In the main menu, press number 6 to choose the 6th option. Press
the number again to confirm the selection. Picture 1-3 the system
password interface pops up. Enter the correct system password
(factory default password is 0000. Press * to delete. Press
return) and press # to enter to picture 1-4 system setting interface.
There are network address setting, room number setting, time
setting, system password modification.
picture 1-2
Operation
1. Network address setting
In picture 1-4, press number 1 to choose the first option. Press
number 1 again to confirm the selection. Picture 1-5 will show.
Press
picture 1-3
or
to move from upper to lower frame and fill
to
picture 1-4
-10-