Home Security - ROHS SM812CH-MV3(T) Installation And Operation Manual

Home security

In picture 1-2 the main menu interface, press number 3 to choose
the option. Press number 3 again to confirm the selection.
Picture1-14 will show the home security. There are home, out,
sleep, SOS modes.
picture1-14
Operation
Defence zone:
there are 8 defence zones.The last 3 defence zones are 24
hours on, so they do not need to set. The default setting is
smoke, gas and SOS.Defence zones 1-5 can be set according
to the requirement:door magnet, window magnet, IR.
Defence zone delay time: default is 60 seconds.
Alarm delay time:
default is 60 seconds, as picture 1-14, user can change from
0, 15, 30 and 60 seconds. Confirm the number and icon
changes to orange. The delay time is chosen successfully.
-23-
1.Set defence
In picture 1-14, press the number in front of the mode, then
press the number again to confirm the selection. The chosen
icon turns to orange and show " defence delay ". After the 60
seconds default delay time, the indoor monitor will show "set
defence successfully".
2. Cancel defence
When the alarm of the defence zone is triggered, picture 1-15
alarm information will pop up. The icon turns to orange. The
guard station and other alarm system will ring. Press
stop the indoor monitor ringing, and return to the main menu.
Enter to picture 1-14 to choose the defence to cancel. Press
the number of the icon to confirm the cancellation. Enter the
user password in picture 1-9 and the icon will change to blue
and show "ancel successful".
picture 1-15
to
picture 1-16
-24-