Advertisement
Factory
setting 1234
WM1/WM2 wireless receiver ID setting, sets the internal
reception code
1. Press button
WM1/WM2
flashing figure can be adjusted
2. Press button
to adjust the first flashing figure
3. Press button
to move to the next figure to the right for
adjustment (the second figure)
4. Repeat
and
fourth figure
5 Press button
to confirm and save
* The setting value must be the same as the microphone or
microphone value must be the same as the internal receiver's
setting value
USB slot
MP3 POWER (USB/SD) power switch
* Suggested to keep the switch on the ON position
(pressed down)
MP3 (USB/SD) record/playback switch
Press
button to select the recording location,
Record
USB or SD
Press
Press
Press
Playback
Press
Press
Press
Start recording button
REPEAT repeat button, three repeat modes
Repeat single track mode
Repeat all folders mode
Repeat single folder mode
Skip track/search track buttons
Skip forward or backwards a track, holding down
the button will fast rewind/fast forward, making it
convenient to search for track positions
Playback/pause button, starts playback/pauses
playback
Stop button, stops playback
figure 1234 displays in which the
to adjust the setting values for the third and
button (REC) getting ready to record
RUH
button to start recording
button to stop recording
button (PLAY)
button to switch to MP3 playback
button to start playback
Advertisement
