Table of Contents

Advertisement

D

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Sanha jlh-202d

  • Page 3: Table Of Contents

    Table of Contents Operation Function Locations Operations Wireless Microphone – Wireless Receiving Features Wireless Transmission Audio Function Operations Transmitter ID Code Setting Host ID Number Location WM-209 Transmitter Features ID Setting Procedures Features & Functions Electrical Specifications Standard Accessories Charging Function Description Host Lead-Acid Battery Charging Method Microphone/Transmitter Lithium Battery Charging Method...
  • Page 4: Operation Function Locations

    Operation Function Locations AUX Input Charging Volume Indicator Control Wireless Microphone Reception Signal Indicator Wireless Auxiliary Microphone Input Jack Volume Control Signal Wired Microphone Output Jack Volume Control Power Indicator/ Rechargeable Battery Low Power Indicator Wired Microphone Input Jack AC Power Cord Socket DC Rechargeable (AC90~264V)
  • Page 5: Operations

    Operations Charging Indicator: While charging, the LED indicator will be constantly on, meaning that charging is operating normally. Wireless Microphone Volume Control: Used to adjust the volume of the wireless microphone recommended to be set at the 1 O’clock position). Wired Microphone Volume Control: Used to adjust the volume of the wired microphone.
  • Page 6: Wireless Microphone - Wireless Receiving Features

    Wireless Microphone – Wireless Reception Features Supports 48KHz’ 16 bit 2 channel uncompressed audio frequency transmission. After powering on, it will automatically scan the surrounding environment and select an uninterrupted frequency for use. The volume is controlled by digital units, low power consumption. There are two reception systems equipped in the receiver: Diversity A and B;...
  • Page 7: Wm-209 Transmitter Features

    WM-209 Transmitter Features UHF frequency band/fully digitalized CMOS technology processing Uses Japan Sanyo 3.7v-2100mA rechargeable lithium battery When activating the microphone and receiver for initial use, first set the grouping LCD display code Any product from our company can be interchangeably-grouped easily, and is not limited to group use 9999 band group selection settings, no external signal interference When turned on…the microphone (WM-209) will first automatically scan for a suitable environmental position, and then…the receiver will also follow and use the suitable frequency band selected by the...
  • Page 8: Features & Functions

    Features & Functions The overall crafting uses a lightweight form, with a delicate and professional stage speaker appearance creative design. Professional class stage timbre, vigorous low frequency, loud and clear intermediate frequency, clear and detailed high frequency; can not be compared by other similar class products.
  • Page 9: Charging Function Description

    Charging Function Description 1 .Host Lead-Acid Battery Charging Method While the rechargeable battery is in use, the POWER/BATT LOW” LED signal will turn green, which means warning that the battery voltage is sufficient; the internal protection device will cut off the power functions of the host rechargeable battery. When charging, please insert the AC power cord, and switch the power switch on the main unit to the...
  • Page 11 Table of Contents 目錄 操作功能位置說明 操作說 明 無線麥克風─無線接收特性 無線傳輸音源功能操作 發射器ID碼設定 主機ID號碼 位置 WM-209發射器特性 ID設定程序 特性功能 電器規 格 標準配件 充電功能說明 主機鉛酸電池充電方法 麥克風 / 發射器 鋰電池充電方式...
  • Page 12: 操作功能位置說明

    操作功能位置說明 充 電 指 示 燈 號 AUX輔 助 輸 入 音 量 控 制 器 無 線 麥 克 風 接 收 訊 號 指 示 燈 無 線 麥 克 風 輔 助 輸 入 插 座 音 量 控 制 器 有...
  • Page 13: 操作說明

    操作說明 充 電 指 示 燈: 充 電 中LED 恆 亮 表 示 充 電 正 常 運 作 中 無 線 麥 克 風 音 量 控 制 器: 調 整 無 線 麥 克 風 音 量 大 小 (建...
  • Page 14: 無線麥克風─無線接收特性

    無線麥克風─無線接收特性 支援48KHz' 16位元2通道 未壓縮的音頻傳輸 電源開啟後會自動掃描週邊環境' 選擇無干擾頻道使用 音量藉由數位單元控制' 低電流消耗 在接收器內配置Diversity A、B兩個接收系統'通過各自天線接收無線麥克風的訊號 在比較A、B訊號的強弱上' 選擇狀態良好的訊號作為輸出 接收頻率響應20Hz-20kHz/+-0db 接收靈敏度-90db 9999頻段組群選擇設定絕不受外部訊號干擾 無線傳輸音源功能操作 1. 無線發射器(Wm-209)輸入座3.5mm孔徑傳輸線 連接 Audio(IPOD/IPHONE-MP3播放機)可做為無線播放 2. 無線發射器(Wm-209)可直接調整音量大小(開機值設定在30) 3. 無線發射器(Wm-209)與(FWM-49)領夾式麥克風使用 無線傳輸連結說明 UHF WIRELESS TRANSMITTER 連接至音源輸出 3.5 STEREO 立體插頭 VOLUME 連接至WM-209 無線發射器輸入孔 3.5 MONO單音插頭 發射器ID碼設定: (出廠預設值1234) 第一次使用本機時 WM-209無線發射器ID碼...
  • Page 15: Wm-209發射器特性

    WM-209 發射器特性 UHF頻帶/完全數位化CMOS技術處理 採用日本sanyo 3.7v-2100mA鋰充電池 初次啟用麥克風與接收機'必須先設定組群LCD顯示內碼 本公司任何產品'都能非常簡易相互更改組群'不受限配對使用 9999頻段組群選擇設定'決不受外部信號相互干擾 開機時…麥克風(WM-209)會先自動掃描在適當的環境位置 然後…接收機就會跟隨著麥克風'所選擇的適當頻道位置上使用 採用單一指向性'超感度電容式音頭 電容式音頭靈敏度:(0db=1v/pa 1khz)/頻率響應:50HZ~16KHZ 領夾式音頭配件'男女衣領夾左右可自由配戴'保証永久品質不斷裂 增益Level大小可随時在使用中'自行在麥克風上調整增益感度聲音大小 外觀設計'輕巧新穎'創新造形'獨特電池磁環機構專利設計 WM-209 鋰 充 電 池 音 量(- ) 顯 示 器 VOL 音 量 調 整 : VOL (-) / VOL (+) (使用 中 都在VOL模式) 音...
  • Page 16: 特性功能

    特性功能 整體工藝輕巧造形 細緻專業舞台音響外觀創意設計 專業評等級舞台音色 低頻渾厚 中頻宏亮 高頻細緻分明 非一般同等級可以比擬 專業舞台等級的高效能喇叭系統, 強勁的音壓, 寬廣的聆聽角度 適用於任何場所…販賣場-學校教學-研討會議-室外活動 UHF頻帶/完全數位化CMOS專業技術處理 UHF無線發射器(WM-209) 領夾電容式麥克風(FWM-49H) 組合最佳音色 UHF無線麥克風(WM-209)可自行在使用中調整音量大小 無線發射器(WM-209) 內藏9999組群決不受外部訊號干擾, 可自行設定組群 主機接收器內配置Diversity A/B RF雙接收天線系統 本公司任何機種都能使用WM-209不須配對選擇 WM-209開啟電源後自動掃描週邊環境, 所以絕不受外部雜訊干擾 無線發射器(WM-209) 可接IPOD/IPHONE/MP3/CD PLAYER 音源做無線傳輸至主機播放 數位式電源AC 90V ~264V電流過載/短路保護裝置 直流電池充電 過充電流保護&過放斷截電源裝置 交直流自動充電系統 電氣規格 輸出功率:RMS 35W 頻率響應:50HZ~18KHZ 信號雜訊比:SN90db以上...
  • Page 17: 充電功能說明

    充電功能說明 1 . 主機鉛酸電池充電方法: 充電電池使用中 POWER/BATT LOW” LED 燈號會變成綠燈'表示預警電池電壓 在不足之狀態'內部保護裝置會將主機充電電池之電源功能切斷 充電時請插入 CHARGE 的位置'此時主機 Ac電源線'並將主機電源開關切到 上端 充電電源紅色指示燈會恆亮'即表示充電電源連接正常 充電指示燈不亮'表示電池損壞或放置接觸點連接不妥 本設備有過放電之斷電裝置/過充之保護斷電裝置 請注意: (1) 此電池充電時間約為8 ~ 10小時 (2) 充飽後'充電紅色指示燈號仍亮著'因內部有過充保護線路'會自動斷電 (3) 使用AC電源,開關切在ON的位置時'仍會繼續補充微小電流充電 (4) 長期不使用必須在3~6個月內補充充電一次 (5) 使用鉛酸電池之後'必須馬上充電 2. 麥克風 / 發射器 鋰電池充電方式: 請將此鋰電池,自麥克風/發射器取出,放置所附之充電座上,充電座上 綠燈 亮起,即表示充電完成...
  • Page 20 智音電子企業有限公司 新北市板橋區信義路163巷3號9樓 專業無線擴音器製造廠...

Table of Contents