Radio Operations; External Component Operations; Sound Adjustments; Adjusting The Sound - JVC KD-G246 Instructions

OPERATIONS
Basic operations
Control panel
• Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the
power is on).
Detach the panel.
Select the source.
* You cannot select "CD" as the playback source if there is no disc in the unit

Radio operations

Select "FM/AM."
Select the bands.
Search for a station—Auto Search.
Manual Search: Hold either one of the buttons until "M" flashes on the display, then press it repeatedly.
When an FM stereo broadcast is hard to receive
Reception improves, but the stereo effect will be lost.
• MO indicator lights up.
To restore the stereo effect, repeat the same procedure.
FM station automatic presetting —SSM (Strong-station Sequential Memory)
You can preset six stations for each band.
Manual presetting
Example: Storing the FM station of 92.5 MHz into preset number 4 of the FM1 band.

External component operations

You can connect an external component to the AUX (auxiliary) input jack on the control panel.

SETTINGS

Sound adjustments

Preset values
BAS MID
Indication (For) (bass) (mid-range)
USER (Flat sound) 00 00
ROCK (Rock or disco music) +03 00
CLASSIC (Classical music) +01 00
POPS (Light music) +02 +01
HIP HOP (Funk or rap music) +04 –02
JAZZ (Jazz music) +03 00
Check the current clock time/other information.
See also "CLK DISP" of "General settings—PSM."
Volume control.
Select preset station.
5 ∞
• You can also use / to select preset station.
Stereo mini plug
(not supplied)

Adjusting the sound

TRE LOUD
(treble) (loudness)
BAS* 1 (bass) : Adjust the bass.
00 OFF
MID* 1 (mid-range) : Adjust the middle frequencies sound level. –06 to +06
+02 OFF
TRE* 1 (treble) : Adjust the treble.
+03 OFF
FAD* 2 (fader) : Adjust the front and rear speaker balance. R06 to F06
+02 OFF
BAL (balance) : Adjust the left and right speaker balance. L06 to R06
+01 OFF
+03 OFF
Display window
Playback mode / item indicator
Disc indicator
Tr (track) indicator
• Source display
• Track number
• Volume level indicator
• Time countdown indicator
Disc operations
Eject disc.
• Press SRC to
listen to another
playback source.
4 ¢
• /
[Press] Go to the next or previous track.
[Hold] Fast-forwards or reverses the track.
Turn on the power.
Insert disc.
All tracks will be played repeatedly until you change the source or eject the disc.
Selecting the playback modes
After pressing M MODE, press the following buttons to...
TRK RPT : Plays the current track
repeatedly.
RPT OFF : Cancels.
ALL RND : Plays all tracks of the current
disc at random.
RND OFF : Cancels.
Skipping a track quickly during play
Example: Select track 32
Portable audio player, etc.
To avoid the sudden increase of the output level when changing the
source, adjust the auxiliary input level (AUX ADJ) accordingly.
(See "AUX ADJ" of "General settings—PSM.")
*
–06 to +06
*
*
–06 to +06
*
2
• MO: Lights up in monaural mode.
• ST: Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
LOUD (loudness) indicator
EQ (equalizer) indicator
Main display (time, Sound mode (iEQ: intelligent equalizer)
playback information) indicator
[Press] Select track number (01 – 06).
[Hold] Select track number (07 – 12).
Changing the display information
: Clock with the current track number
: The elapsed playing time with the current track
number
* If the current disc is an audio CD, "NO NAME" appears.
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition, repeat the same procedure.
Turn on the connected
component and start
playing the source.
LOUD* 3 (loudness) : Boost low and high frequencies to
produce a well-balanced sound at
a low volume level.
VOL (volume) : Adjust the volume.
1 When you adjust the bass, mid-range, or treble, the adjustment you have made
is stored for the currently selected sound mode (iEQ) including "USER."
2
If you are using a two-speaker system, set the fader level to "00."
3
The adjustment made (LOUD ON/LOUD OFF) will be applied to all sound modes
(iEQ).
4
Depending on the amplifier gain control setting.
LOUD ON or
LOUD OFF
00 to 50
4
(or 00 to 30)*
\
See reverse page