Table of Contents
Advertisement
36
IP-R
U
M
EACH
SER
ANUAL
Changing Serial Settings
You may change the serial terminal settings such as baud rate, parity, and stop bits used by
IP-Reach to communicate with your serial device, by right-clicking on the serial port entry in the RRC
Navigator, and selecting Serial Parameters in the menu. Click [OK] when finished.
Remote Device Administration
When logged into an IP-Reach unit as a user with administrative privileges, IP-Reach allows you to
perform many powerful device administration tasks remotely.
Configuration Menus
An Administrative user can access IP-Reach's lowest level configuration menus (explained in detail in
Chapter 4), by double-clicking the "Admin" port entry of an IP-Reach device shown in the RRC Navigator.
Firmware Upgrade
Remote firmware upgrades may be performed by selecting Tools
Update Device on the RRC Menu Bar.
RRC will prompt you to locate a Raritan firmware distribution file (*.RFP format), which can be found on
the Raritan web site (www.raritan.com) when available. Be sure to read all instructions included in
firmware distributions before performing an upgrade.
Device Restart
Administrative users may restart IP-Reach units by selecting Tools
Restart Device on the RRC Menu
Bar.
Device Configuration Backup and Restore
By selecting Tools
Save Device Configuration and Tools
Restore Device Configuration on the
RRC Menu Bar, Administrative users may download and upload complete IP-Reach configurations to their
local computers for archiving.
Log Files
IP-Reach provides detailed activity logs for troubleshooting purposes, which may be downloaded to your
local computer for viewing, reporting, and analysis. On the RRC Menu Bar, select Tools
Save Activity
Log, or Tools
Save Diagnostic Log.
Advertisement
Table of Contents
