Specifications - Luxman EQ-500 Owner's Manual

Specifications

Input sensitivity
When the gain is set to 36 dB
Input impedance
Gain
When the gain is set to 36 dB
RIAA deviation
Maximum allowable input voltage
1kHz
Output impedance
S/N ratio
When the gain is set to 36 dB
Total harmonic distortion
1 kHz, 1 V output
When the gain is set to 36 dB
Channel separation (10kHz)
Accessories
Circuit
Vacuum tube used
Power consumption
Power supply
Max. external dimensions
Weight
* Specifications and the appearance are subject to change without notice.
VACUUM TUBE PHONO AMPLIFIER EQ-500
MM : 4mV/250mV, LINE output 1kHz, Load 50kΩ
MC-HIGH : 0.44mV/250mV, LINE output 1kHz, Load 50kΩ
MC-LOW : 0.18mV/250mV, LINE output 1kHz, Load 50kΩ
MM : 4mV/250mV, BAL output 1kHz, Load 100kΩ
MC-HIGH : 0.44mV/250mV, BAL output 1kHz, Load 100kΩ
MC-LOW : 0.18mV/250mV, BAL output 1kHz, Load 100kΩ
MM : 30 kΩ - 100 kΩ (variable)
MC-HIGH : 40Ω
MC-LOW : 2.5Ω
MM : 36dB (1kHz)
MC-HIGH : 55dB (1kHz)
MC-LOW : 63dB (1kHz)
MM : 20 - 20kHz ±0.3dB
MC-HIGH : 20 - 20kHz ±0.3dB
MC-LOW : 20 - 20kHz ±0.3dB
MM : 300mV
MC-HIGH : 34mV
MC-LOW : 13mV
LINE OUT : 850Ω
BAL OUT : 850Ω
MM : 76dB (IHF-A)
MC-HIGH : 75dB (IHF-A)
MC-LOW : 74dB (IHF-A)
0.07%
65dB
• Power cable • Safety cautions
• Owner's manual
SRPP, Final stage cathode follower, Non-feedback CR type
ECC83 x 4 pieces, ECC82 x 2 pieces, and EZ81 x 1 piece
47 W
230 V ~ (50 Hz)
440 (W) x 92 (H) x 397 (D) mm
(front side knob of 5mm and rear side terminal of 12mm included in
depth)
12.5 kg (main unit only)
11