Sharp AH-S327W2 Service Manual page 31

12. Cut the band.
13. Disconnect five wires from the control box to the reactor
and capacitors.
(To reactor: two wires / To capacitor: three wires)
14. Take out the control box and put it just under.
(The compressor cord is still wired)
15. Remove two screws which are fixing heat insulator
assembly. And take it out.
16. Remove two screws which are fixing bulkhead. And take
it out.(Fixing the bottom part is used special screw)
17. Disconnect the compressor cord.(Three wires)
31
AH-S327W2
AU-S327W2