• Wireless Adapter for non Wireless-enabled PCs Hardware Installation 1. Connect one end of the telephone cable to the Line port on the LogN HN-DR4PN2v2. 2. Connect the other end of the telephone cable into the ADSL port of the ADSL splitter or directly to the wall phone socket.
6. Select to connect your PC to LogN HN-DR4PN2v2 either wirelessly or by wire. Make sure not to connect both wirelessly and by wire at the same time. • If wirelessly, make sure your PC wireless is on, search for “LogN” in your PC wireless list, connect.
Page 4
3. Select “Quick Setup” button from the shown menu. A small window will pop-up telling that 192.168.1.1 is requesting for user name and password to access LogN HN-DR4PN2v2 GUI page.Type “admin” for user name and “password” for password. Make sure that you write the user name and password correctly and in small characters.
Page 5
Internet now. Changing Wireless Name 7. If you want to change wireless name, Change SSID “LogN” to the name you want your wireless network to appear with. 8. Do not press “Commit & Reboot” if you still want to secure your wireless connection.