Advertisement
Quick Links
Download this manual
See also:
User Manual
HN-DR4PN2U
Package Contents
Power Adapter
•
1 x RJ-11 Telephone Cable
•
1 x RJ-45 LAN Cable
•
1 x USB Cable
•
Quick Installation Guide
•
•
ADSL Subscription
Minimum System Requirements
3G/4G USB MODEM with active subscription
•
3G/4G USB MODEM is compatible with HN-DR4PN2U
•
PC with Ethernet Port and/or Wireless
•
Wireless Adapter for non Wireless-enabled PCs
•
•
Hardware Installation
1. If you have ADSL Subscription only and no 3G/4G USB MODEM
Connect one end of the telephone cable to the Line port on the LogN HN-
DR4PN2U.
•
Connect the other end of the telephone cable into the ADSL port of the ADSL
splitter or directly to the wall phone socket.
•
Connect the ADSL splitter line port to the wall phone socket whereby the ADSL
service is activated.
•
2. If you have 3G/4G USB MODEM only and no ADSL Subscription
Plug your 3G/4G USB MODEM into the USB port
•
Advertisement
Related Manuals for LogN HN-DR4PN2U
Summary of Contents for LogN HN-DR4PN2U
-
Page 1: Minimum System Requirements
• Hardware Installation 1. If you have ADSL Subscription only and no 3G/4G USB MODEM Connect one end of the telephone cable to the Line port on the LogN HN- DR4PN2U. • Connect the other end of the telephone cable into the ADSL port of the ADSL splitter or directly to the wall phone socket. -
Page 2: Hardware Configuration
• If by wire, connect one end of the LAN cable to the LAN port of the LogN HN- DR4PN2U, connect the other end of the LAN cable to the LAN port of your PC or •... -
Page 3: Going To Quick Setup Page
LogN HN-DR4PN2U GUI page. Type “admin” for user name and “password” for password. Make sure that you write the user name and password correctly and in small characters. You will be led to LogN HN-DR4PN2U status page. 4. Select “Quick Setup” button from the shown menu. -
Page 4: Running Adsl Internet Service
7. If you do not want to change wireless name or secure your wireless connection, press “Apply/Save”, you will be directed to “Quick Setup Successful” page below, Press “Next”, you will be directed to LogN HN-DR4PN2U status page again, you are now finished with configuration. -
Page 5: Changing Wireless Name
8. You will find Internet Led ON (Blinking Fast/Yellow). You are connected to Internet now. Changing Wireless Name 9. If you want to change wireless name, in the “Quick Setup” page, Change SSID “LogN” to the name you want your wireless network to appear with.