Page 1
AG19 10' cantilever umbrella A S S E M B L Y A N D O P E R A T I O N ®...
Page 2
Thank you for your purchase of Treasure Garden’s AG19 cantilever umbrella. Please remove all contents from the package, inspect and review checklist for all parts. CAUTION: To reduce personal injury and damage to your umbrella, read and follow this Assembly and Operation information.
Page 3
Press the spring locks and continue to slide the bottom pole until it locks in place. 2. Lift the AG19 up and insert it into the base. 3. Hold the closed shade and slowly move it upwards until the spring locks lock into place (Fig.
Page 4
O P E R A T I O N : TO OPEN AG19 1. Hold the operating handle (Fig. 5) on the cantilever and push it up until the opening stop is reached (Fig. 6). 2. Turn the crank (Fig. 7) clockwise until the umbrella is fully opened and the slider (Fig.
Page 5
To ADJUST the TILT 1. Pull the operating handle to release the crank case and steering rod from the support strut (Fig. 12). 2. Pull the steering rod further away from the support strut (to an angle of about 45°) until the steering rod is in the marked range (Fig.
Page 6
V E G A ™ L I G H T A D A P T E R : To ATTACH VEGA Umbrella Light: 1. Loosen the VEGA light adapter built into the umbrella runner by turning counter- clockwise (Fig. 17). 2.
Page 7
The dealer will verify the defect and failure caused by neglect of work closely with Treasure Garden to reasonable and necessary care are obtain the necessary service. not covered by this warranty.
Need help?
Do you have a question about the AG19 and is the answer not in the manual?
Questions and answers
Telephone number for Treasure Garden Parts department