OXY2E Display and Operation
SET BUTTON
1. Press and hold "Set Button" for 5 seconds to enter Programming Mode.
2. When valve is in Programming Mode, press "Set Button" to confirm setting and advance to next
menu option.
ADVANCE BUTTON
1. Press and hold "Advance Button" for 5 seconds to initiate an immediate regeneration cycle.
2. Press and release "Advance Button" during a regeneration cycle to immediately advance the valve
to the next step in the regeneration process.
3. When the valve is in Programming Mode, press the "Advance Button" to move the cursor.
UP BUTTON
1. When the valve is in the Programming Mode, press "Up Button" to adjust setting.
Advance Button
FIGURE 6: OXY2E Display Panel
10