Table of Contents
Advertisement
Quick Links
Operation Manual
for the
Turboflotor multi SL
Motor driven skimmer for saltwater aquaria up to 1000 l.
In purchasing this unit you have selected a top quality product. It has been
specifically designed for aquarium use and has been tested by experts. This unit will
efficiently remove the dissolved organic substances in your aquarium water.
1
Advertisement
Table of Contents
Related Manuals for Aqua Medic Turboflotor multi SL
Summary of Contents for Aqua Medic Turboflotor multi SL
- Page 1 Operation Manual for the Turboflotor multi SL Motor driven skimmer for saltwater aquaria up to 1000 l. In purchasing this unit you have selected a top quality product. It has been specifically designed for aquarium use and has been tested by experts. This unit will...
-
Page 2: Product Description
1. Product description The Turboflotor multi SL consists of the following parts: - Foam cup, cover and reaction-pipe - a venturi pump Ocean Runner pH 2500 inclusive Needle wheel - outflow box – 2 pieces. 2. Parts of the Turboflotor multi SL 1. - Page 3 Surface active compounds like proteins behave in the same way. The Turboflotor multi SL uses its air bubbles to create a large water surface for the waste substances to attach themselves to. These air bubbles are forced into the reactor-pipe in a such a way that they undergo a long contact time within the counter current.
- Page 4 4. Set-up The Turboflotor multi SL is a skimmer, that can be set up in various ways: 1. As an external skimmer, directly mounted on the aquarium: “Hang on”, (fig.3) 2. For use in the cabinet with a sump or under tank filter system (fig.4)
- Page 5 Set up: beside or inside the filter tank of a sump or under tank filter system The Turboflotor multi SL can also be used in a sump or under tank filter system. It can be placed either in- or outside the filter.
- Page 6 18. filter tank 19. re-circulation pump 20. overflow chamber 21. Return flow into the aquarium Fig.5: Turboflotor multi SL, set up adjacent to the filter tank of a sump or under tank filter 5. Starting / Performance The system can be started when the Turboflotor is correctly installed. After switching the pump on, air is automatically drawn into the skimmer.
- Page 7 5. Problems Adjustments: Due to the construction, air and water mixing is automatic, but you can increase the amount of air and water by removing the grey reduction piece from the suction side of the pump. Normally no adjustment is required but it may be necessary to alter the flow control taps (8) to ensure overpumping does not occur particularly in the start up phase.
- Page 8 7. Warranty On the Turboflotor multi SL we guarantee 12 months on material defects. Excluding all wearing parts. Proof of purchase is the original invoice. warrants only material and workmanship defects. The warranty will not apply to complaints, which are due to improper installation or miss use, poor cleaning, frost, calcium deposition or improper repairing.
Need help?
Do you have a question about the Turboflotor multi SL and is the answer not in the manual?
Questions and answers