♦
Undo the wing screw
and push the guide rod on the circular/parallel
cutting attachment
on the bottom of the baseplate
centring point is facing downwards.
♦
Insert the centring point into the centre of the
circle.
♦
Adjust the circular/parallel cutting attachment
spacing so that the bit can be inserted into the
guide hole at the edge of the circle.
♦
Lock the baseplate
screws
.
♦
Switch the tool on by pressing the ON/OFF
switch
and holding it down.
♦
Push the tool slowly forwards.
Extracting dust
■
The tool is fitted with an extraction nozzle
for dust extraction.
♦
Insert the adapter
♦
Connect a vacuum cleaner to the adapter
Using the tool in continuous operation
Lock the ON/OFF switch
♦
Press the ON/OFF switch
♦
Now press the locking switch
the ON/OFF switch
Unlocking the ON/OFF switch
♦
Press the ON/OFF switch
PSFS 250 A1
on the baseplate
through the two recesses
so that the
by tightening the wing
into the extraction nozzle
:
.
and release
.
:
and release it.
Maintenance and cleaning
,
WARNING! RISK OF INJURY!
Always switch the appliance off
before carrying out any work on it.
The appliance is maintenance-free.
■
Always clean the appliance directly after finishing
work.
■
Use a dry cloth to clean the housing. Under
no circumstances should you use detergents,
solvents or abrasive cleaners.
■
Ensure ventilation openings are always free of
obstructions.
■
Remove any adhering swarf with a brush.
NOTE
►
Spare parts which are not listed (e.g.
►
carbon brushes, switches, can be ordered
using our service hotline.
Disposal
.
The packaging is made from environmen-
.
tally friendly material and can be disposed
of at your local recycling plant.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
GB
7