Brother PE-300S Service Manual page 9

 
1. DISASSEMBLY AND REASSEMBLY OF THE OUTER PARTS
AND MAIN PARTS (SEWING MACHINE) ....................................................... 8
2. ASSEMBLY AND DISASSEMBLY OF THE EMBROIDERY UNIT ............... 24
3. LEAD WIRE ARRANGEMENT....................................................................... 26
* Note
On this machine, the arm bed cannot be setup when the outer components are disassembled. Likewise,
damage can result when items are attached to the rear side of arm bed and the machine is carelessly laid on
its side or knocked over.
When assembling or disassembling, do so on top of a flexible mat.
* For the mat, use a polyethylene sheet with a thickness of about 10-20mm.
You may also use 2-3 layers of wadded material (such as quilting).

- 7 -