Battery Replacement - Aktakom ATE-2509 Operation Manual

Dual laser plus type k thermometer
Table of Contents

Advertisement

6. BATTERY REPLACEMENT

When the 'Low Battery' icon
low, the battery should be replaced immediately with
AAA, 1.5V batteries. Please note : It is important to
turn the instrument off before replacing the battery
otherwise the thermometer may malfunction.
Error 5~9, for all other error messages it
is necessary to reset the thermometer.
To reset it, wait for auto power off,
remove the battery and wait for a
minimum of one minute, reinsert the
battery and turn on. If the error message
remains please contact the Service
Department for further assistance.
" Hi " or " Lo " is displayed when the
temperature being measured is outside
of the measurement range.
Battery OK :
Measurements are possible.
Battery Low :
Battery needs to be replaced,
measurements are still possible.
Battery Exhausted :
Measurements are not possible
8
indicates the battery is

Advertisement

Table of Contents
loading

Table of Contents