Samsung VP-D10 Service Manual page 42

3-3. LCD Adjustment
Notes: For LCD adjustment, use the buttons on the video camera and the remote control.
After each adjustment step is completed, OSD shows "OK".
EEPROM(ICL202) stores confirmed adjustment value of each adjustment step.
After finishing the adjustment, turn power off.
1. How to get into the LCD adjust mode.
STEP 1
1. Connect the power source
(battery/DC cable).
2. Set the "CAMERA/PLAYER" switch to
"CAMERA" position.
3. Camera screen and OSD appears.
4. Open housing of the video camera and
remove tape.
Monitor screen
LCD
01 MODE 1
EPR:XX EVR:XX
When monitor OSD shows as above screen, LCD
adjustment mode has been activated successfully.
Note : "XX" indicates variable values.
2. Functions of each button on the Remote Control
Button
START/STOP (Confirm)
FF (Mode Up)
REW (Mode Down)
PLAY (Data Up)
STOP (Data Down)
Note: In service adjustment mode, button names are different from those in customer function control
mode.
Samsung Electronics
Stores changed value in the adjustment mode.
Shift adjustment address to left.
Shift adjustment address to right.
Up value.
Down value.
STEP2
1) Press and hold the "EDIT(+)" button on the
video camere and"SELF TIMER" button on the
remote control at the same time for more than 5
seconds.
2) Press the "DISPLY" button to make color bar
appear.
Remote Control Button Location
Description
Adjustment and Adjustment
3-29