Remote Control - Samsung VP-D10 Service Manual

3-1-3. PRML Adjustment Preparation
1. How to set up PRMLAdjustment Mode
PRML Adjustment Setup
1. Press the Display button in VCR adjustment mode.
2.When monitor OSD appears as shown below, PRML adjustment mode has been activated
successfully.
MODE REG
PLAY O
S64 LOO
2. Remote Control Button Location

Remote Control

3. Press the Address selection button(START/STOP button) to skip the next address in order to finish the
adjustment and store data. After finishing the adjustment, you have to do power reset.
* The PRML BER will be set to the right adjustment when shipping out video camera and PCB ASSY from
factory.
Samsung Electronics
SP PLAY
PRML EPR
OCO OCO
Adjustment and Adjustment
Indicates address of adjusting item
by using from 00 to 24.
Indicates operating mode of PRML.
Indicates preset values.
Indicates the adjusted values.
3-5