Circuit-test PSC-260 Operation Manuals page 3

Keep this manual in a safe place for quick reference at all times.
This manual contains important safety and operation instructions for
correct use of the power supply. Read through the manual and pay
special attention to the markings and labels of this unit and equip-
ment to be connected.
Pay special attention to these two types of notices used in this manual
WARNING: Failure to observe this warning may
cause injury to persons and damage to power
supply or connected equipment.
CAUTION: Failure to observe this warning may
result in damage to equipment and Improper
functioning of the power supply.
1. Do not use this power supply near water.
2. Do not operate or touch this power supply with wet hands.
3. Do not open the casing of the power supply when it is con-
nected to ac mains.
4. Refer all servicing to qualified service personnel only.
5. Before replacing the AC fuse at AC socket, find out and clear
up the cause first.
6. Replace the AC fuse with the same type and rating as the origi-
nal fuse.
7. The max. output voltage of Model PSC-260 is 60VDC, avoid
touch the metal contact part of the output terminals.
User Manual
Warning
– 3 –