Advertisement
4
English
Installation
Place the faucet and sealing ring on the mounting
surface.
Install the friction washer, metal washer, and mount-
ing nut.
Tighten the mounting nut.
Tighten the tensioning screws.
Install the drain pull rod (not included with
10058XX1)
Connect the hot and cold supply lines to the stops
using ⅜" compression fittings (not included).
Use two wrenches, as shown in
the diagram, to prevent hose
twisting.
Install the drain (not included with 10058XX1).
Turn on the water and check all connections for leaks.
Advertisement
