Sharp PN-B501 Operation Manuals page 42

Controlling the Monitor with a computer (RS-232C)
Others
Function
SCREEN SIZE
VOLUME
MUTE AUDIO
INFORMATION MODEL
SERIAL NO
TEMPERATURE SENSOR
TEMPERATURE ACQUISITION
CAUSE OF LAST STANDBY MODE
LAN SETUP DHCP CLIENT
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
FTP connection
Monitor name
FTP Username
FTP Password
User name
Password
Auto logout time
Data port
Reflecting LAN setting
42
E
Command Direction Parameter
WIDE WR 1-5
VOLM WR 0-31
MUTE WR 0-1
INF1 R
SRNO R
DSTA R
ERRT R
STCA W 0
R
DHCP WR 0-1
IPAD WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than 3 digits, to 3 digits to fill 0.
SBMK WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than 3 digits, to 3 digits to fill 0.
DFGW WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than 3 digits, to 3 digits to fill 0.
FCHE WR 0-1
MNTR WR XXXXXXXX
XXXXXXXX
FUSR WR XXXXXXXX
FPAS WR XXXXXXXX
USER WR XXXXXXXX
PASS WR XXXXXXXX
LOTM WR 00000-65535
TCPP WR 01025-65535
NTUP W 1
Reply
1-5 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2
0-31
0-1 0: OFF, 1: ON
Value
Value
0 Internal temperature normal
1 Internal temperature abnormal has occurred and the monitor is in standby mode
2 Internal temperature abnormal occurred (To delete the information of temperature
abnormal, turn off the main power.)
3 Internal temperature abnormal has occurred and backlight brightness is dimmed
4 Temperature sensor abnormal
Value Returns the temperature at the temperature sensors.
Indicates a temperature sensor abnormality when "126" is returned.
Initialization
0 No detectable error has occurred
1 Standby mode by POWER button or MONITOR OFF button
2 Main power off by the main power switch
3 Standby mode by RS-232C or LAN
4 Input signal waiting mode by No Signal
6 Standby mode by abnormal temperature
8 Standby mode by SCHEDULE setting
20 Standby mode by OFF IF NO OPERATION setting
0-1 0: OFF, 1: ON
* Apply the settings to this monitor by NTUP.
Example: 192168150001
* Apply the settings to this monitor by NTUP.
Example: 255255255000
* Apply the settings to this monitor by NTUP.
Example: 000000000000
* Apply the settings to this monitor by NTUP.
0-1 0: OFF, 1:ON
XXXXXXXX 16 characters or less; half-width alphanumeric characters, "-", and "_".
XXXXXXXX (The field can be left blank, but spaces cannot be entered.)
XXXXXXXX 8 characters or less; half-width alphanumeric characters, "-", and "_".
(The field cannot be left blank, and spaces cannot be entered.)
XXXXXXXX 8 characters or less; half-width alphanumeric characters, "-", and "_".
(The field cannot be left blank, and spaces cannot be entered.)
XXXXXXXX 8 characters or less; half-width alphanumeric characters, "-", and "_".
(The field can be left blank, but spaces cannot be entered.)
XXXXXXXX 8 characters or less; half-width alphanumeric characters, "-", and "_".
(The field can be left blank, but spaces cannot be entered.)
00000-65535 Set the time that display terminate a network connection automatically by minutes.
01025-65535 Set the TCP port number for data communication.
* Apply the settings to this monitor by NTUP.
1 Applies the DHCP CLIENT, IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY,
and Data port settings to this monitor.
Control/Response contents *
○
-
●
○