Table of Contents
Advertisement
Recall menu
Item
Recall All
Miscellaneous menu
Item
Adjusts the clarity and visibility of the edges of the
Sharpness
subjects in the image.
Allows the monitor settings to be set through the
DDC CI
software on the PC.
Displays the current monitor property settings.
Display
Information
The function is to automatically detect the distribution
Adv. Contrast
of an input visual signal, and then to create the optimal
contrast.
This feature is provided to allow aspect ratios other than
Display Mode
16:9 to be displayed without geometric distortion.
Full
Aspect
Slightly enlarges the input image. Use this feature to hide
Overdrive
annoying edge noise if present around your image.
Sets whether to show the BenQ logo when the monitor
Opening Logo
is turned on.
Sets a correct DP format for the DP input.
DP Format
Resets all settings to the factory default values.
Function
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows monitor
controls to be sent via the software for remote diagnostics.
The options under
Display Mode
on the input signal sources.
• Scales the input image to fill the screen. Ideal
for 16:9 aspect images.
• The input image is displayed without
geometric distortion filling as much of the
display as possible.
Function
will be different depending
Range
• Yes
•
No
Range
1 to 5
•
On
•
Off
•
On
• Off
• Off
• 1
• 2
• 3
•
On
• Off
•
1.1
• 1.2
Navigating the main menu
27
Advertisement
Table of Contents
