Download Print this page
Oase BioTec ScreenMatic 12 Operating Instructions Manual
Hide thumbs Also See for BioTec ScreenMatic 12:

Advertisement

BioTec
ScreenMatic 12/18/36

Advertisement

loading

Summary of Contents for Oase BioTec ScreenMatic 12

  • Page 1 BioTec ScreenMatic 12/18/36...
  • Page 5: Safety Information

    Translation of the original Operating Instructions Information about these operating instructions Welcome to OASE Living Water. You made a good choice with the purchase of this productBioTec 12/18/36 Screen- matic. Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
  • Page 6: Safe Operation

    Ensure that the unit is placed at a flood protected place and on firm ground (A1). When installing an OASE UVC pre-clarifying unit (e.g. Bitron), place the unit at a minimum distance of 2 m from the pond edge (A1). Place the transformer at a minimum distance of 2 m from the pond edge at a flood protected place (A1).
  • Page 7: Wearing Parts

    Unit has been in operation only for a short time − The complete biological cleaning effect is only achieved after several weeks − Use the OASE Biokick biological starter for a fast growth of filter bacteria Inadequate pump capacity Readjust the pump capacity...

This manual is also suitable for:

Biotec screenmatic 18Biotec screenmatic 36