Assembling The Shelf - Kompernass KH 325 Operating Instructions Manual

Assembling the shelf

Insert the shelf into the lower cupboard as shown
in Fig. 2.
Ensure that the shelf hooks itself into the rear and
lateral suspension points.
Fig. 2
Assembling the attachment
hooks
Insert the attachment hooks at the de-sired posi-
tions on the door inner surface. To do this, insert
an attachment hook through two openings in the
perforated panel and then slowly press it down
(see Fig. 3).
Fig. 3
Assembling the carrying
handles
Fasten the carrying handles to both sides of the
top piece with the cross-head screws
(see Fig. 4).
The drawers of the top piece are fitted with a
central locking fixture. The drawers can only
be opened when the lid is open.
Fig. 4
Cleaning
Clean the Workshop Tool Trolley with a lightly
moistened cloth. Aggressive cleaning materials
may not be used.
Disposal
Do not dispose of the appliance in your
normal domestic waste.
Dispose of the Workshop Tool Trolley through an
approved disposal centre or at your community
waste facility. Observe the currently applicable re-
gulations. In case of doubt, please contact your
waste disposal centre.
- 4 -