Child-Protector Rear Door Lock; Homelink Wireless Garage Control System; Smart Trunk; Standard Programming - Hyundai 2017 GENESIS G80 Manual

FEATURES AND CONTROLS

Smart Trunk

Trunk will open automatically when
detecting smart key within range near the
trunk for more than 3 seconds.
To enable Smart Trunk function:
Vehicle must be in P (Park) to adjust
settings in the User Setting mode.
1. Select "Door/Trunk" in the User Settings
in the instrument cluster.
2. Check "Smart Trunk".
NOTE: Function is active after 15 seconds
when all doors are closed and locked. The
vehicle will also provide an audible and visual
alarm while activating. For more details, refer
to Owner's Manual.
Factory setting defaults Smart Trunk in OFF
position.

CHILD-PROTECTOR REAR DOOR LOCK

Lock
Insert a key into the hole and turn it
towards the lock position
Unlock
Insert a key into the hole and turn away
from the lock position
12 I Quick Reference Guide

HOMELINK WIRELESS GARAGE CONTROL SYSTEM

Standard Programming

To program most devices, follow these instructions:
1. For first-time programming, press and hold the two outside buttons,
HomeLink
begins to flash (after 10 seconds). Release both buttons. Do not hold
the buttons for longer than 20 seconds.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm)
away from the HomeLink
in view.
3. Simultaneously press and hold both the HomeLink
transmitter button. DO NOT release the buttons until step 4 has
been completed.
4. While continuing to hold the buttons the red indicator Status LED
will flash slowly and then rapidly after HomeLink
to the frequency signal from the hand-held transmitter. Release both
buttons.
For detail instructions and list of compatible products, refer to your
Owner's Manual or visit www.homelink.com.
.
.
GENESIS
®
Channel 1 and Channel 3 Buttons, until the indicator light
®
buttons while keeping the indicator light
®
and hand-held
®
successfully trains
Quick Reference Guide I 13