Philips MBD7020/12 Service Manual page 23

Blue-ray disc player
Hide thumbs Also See for MBD7020/12:
Table of Contents

Advertisement

3 Connect
Make the following connections to use this
product.
Preparations
1
Place the apparatus near to the TV.
2
Place the front left and right speakers
at equal distance from the TV and at an
angle of approximately 45 degrees from
the listening position.
Note
To avoidmagnetic interference or unwanted
noise,never place this apparatus and speakers
too close to any radiation devices.
Basic connections:
Speakers
Video
Audio
Power
Optional connections:
Route audio to other devices
HDMI-compliant AV receiver/
ampl er
Multi-channel AV ampl er/receiver
DigitalAV ampl er/receiver
Analog stereo system
FM antenna
USB ash drive
iPod/iPhone dock (compatible dock:
DCK3060; not supplied)
Wired/Wireless network
Note
Refer to the type plate at the back or bottom of the
productfor iden
cation and supply ratings.
Before you make or change any connections,
ensure that all the devices are disconnected from
the power outlet.
Direction of Use
Connect speakers
Note
Insert the stripped portion of each speaker wire into
the socket completely.
For optimal sound,use the supplied speakers only.
Connect only speakers with impedance that is the
same or higher than the supplied speakers.
The DEMO jack is only applicable to the demo unit
that is not included in the apparatus. Do not attempt
to connect any other device to the apparatus
through this jack.
For the main unit side:
1
Unscrew the speaker connectors.
2
Insert fully the red end of a speaker cable
into the left red (+) connector.
3
Screwthe left red (+) connectorto
secure the cable.
4
Insert fully the silver end of a speaker
cableinto the left black(-) connector.
5
Screwthe left black(-) connectorto
secure the cable.
6
Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
For the speaker side:
1
Unscrew the speaker connectors.
2
For the left speaker,identify the speaker
cable that is connected to the left
connectors on the main unit.
3
Insert fully the red end of the speaker
cableinto the red (+) connector.
4
Screwthe red (+) connectorto secure
the cable.
7-3
a
b
c
R
L
a
b
c

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mbd7020/93

Table of Contents