Silvercrest SWKT 3000 B2 Operating Instructions Manual page 23

GB
MT
20
WARNING - RISK OF INJURY!
► For safety reasons, the lid should not be opened while the water is boiling
or is very hot. There is a risk of receiving severe scalds.
INFORMATION ON TEMPERATURE RANGES
Temperature regulator in boiling range:
― The appliance switches itself off and the control lamps go out as soon
as the water is on the boil. The ON/OFF switch 2 clicks out.
― If you want to keep the water hot after boiling it, adjust the temperature
regulator 5 to the keep hot range (area marked black in tempera-
ture regulator 5) and press the ON/OFF switch 2 downwards until
it engages and the integrated control lamp illuminates.
You should use the keep hot function if you want to keep boiled water
hot, for example, to make fresh tea several times in succession.
Keep hot range
Temperature regulator in keep hot range:
The water does not start boiling in the keep hot range!
― After reaching the keep hot temperature set, the appliance switches
off the heating process. The ON/OFF switch 2 and the integrated
indicator lamp remain switched on.
― Since the device is equipped with a keep hot function, the device
automatically begins reheating as soon as the water temperature
falls below the set temperature. The appliance heats until the desired
temperature is reached.
Transition area
Boiling range
SWKT 3000 B2