Advertisement
Quick Links
Advertisement
Related Manuals for Black Box LP1001AE-R2
Summary of Contents for Black Box LP1001AE-R2
- Page 1 Power over Ethernet Injector User Guide LP1001AE-R2 Rev.1.21 15-Feb-2007...
-
Page 2: Table Of Contents
Content ........................1 VERVIEW .........................3 EATURES ..................3 ARDWARE ESCRIPTION ....................4 ACKAGE ONTENTS ......................4 NSTALLATION... -
Page 3: Overview
Overview The Power over Ethernet Injector provides data and AC power through the Ethernet cable to PoE-equipped device, such as AP, PoE splitter or other equipment support IEEE 802.3af standard. The injector supports IEEE 802.3af standard that can detect the connected device, which support the IEEE 802.3af and then provide the power to the device. - Page 4 Power over Ethernet Injection Application for PoE device...
-
Page 5: Features
Features Power Over Ethernet Injector Remote power feeding application Short circuit protection Mix Ethernet and power into RJ-45 port Deliver power up to 100 meters Light weight and compact size Compatible with IEEE802.3af Plug-and-Play Hardware Description The Power over Ethernet Injector has three connection ports and one LED indicator. -
Page 6: Package Contents
Package Contents One Power over Ethernet Injector User Manual Power cord x 1, 1830mm The Power over Ethernet Injector User Guide Figure 1-1. Package Contents Compare the contents of your Power over Ethernet Injector package with the standard checklist above. IF any item is missing or damaged, please contact your local dealer for service. -
Page 7: Technical Specification
Technical Specification The following table provides the technical specification of the Power over Ethernet Injector. IEEE802.3 10BASE-T Standard IEEE802.3u 100BASE-TX IEEE802.3af RJ-45 Data in/out: Data/signal pairs pin 1,2,3,6 Connector RJ-45 Power out: power over spare wire pairs pin: 4,5(V+) , 7,8(V-) 10BASE-T: 2-pair UTP/STP Cat.3, 4,5 cable EIA/TIA-568 100-ohm (100m) Network Cable...