Software Upgrade And Procedure To Restore Product Setting; Password Change - Philips HTS7202/12 Service Manual

Software upgrade & Procedure to restore product setting
1)Restore factory setting
a) Press " " <Home> button on R/C.
b) Select <Setup>, then press "OK" button on R/C.
c) Select <Advanced>, then press < OK > button on R/C.
d) Select <Restore default settings>,then press <OK> to confi rm.

2)Password change

a) Press " " <Home> button on R/C.
b) Select <Setup>, then press "OK" button on R/C.
c) Select <Preference>, then press <OK> button on R/C.
d) Select <Change Password> <Confirm>, then press <OK> button
on R/C.
"0000" is default password supplied.
3)Trade mode
a) In open model,press " " <Home> button on R/C.
b) Press "2" "5" "9" on R/C,VFD will display "TRA ON" or "TRA
OFF".
4)Check software version
a) Press " " <Home> button on R/C
b) Select <Setup>, then press <OK> button on R/C.
c) Select <Advanced> <Version Info.>,then press <OK> button on
R/C.
d) TV will show message as follow:
Model:HTS7202/12
Versions:
System SW:0.28.01
Subsystem SW:20-00-00-00
Ethernet MAC:00:25:D1:05:88:33
For more information,frequently asked questions and
software updates,please visit
philips.com/support
Close
e) Select <Close> on the version display screen and press <OK>
button to exit .
2 - 1
5) Upgrading new software
Method 1: Update software from a USB storage device
a) Create a folder named "UPG_ALL" in your USB storage device,
and Copy the latest upgrading software into the folder.
b) Connect the USB storage device to the home theater.
c) Press " " <Home> button on R/C, and select <Setup>.
d) Select <Advanced> <Software Update> <USB>.
e) TV will show message as follow:
Now searching for upgrade software!
Please wait...!
Software updates for this player have been found. Do you want to
upgrade?
Cancel Start
f) Select <Start>, press <OK> button on R/C.
Software upgrade will take 5 minutes
Do not switch off!
Package version: 000025.0
Software BE 80%
Software FE Completed
Software MCU1:
Software Dock:
Software MCU3:
Software upgrade will take 5 minutes
Do not switch off!
Package version: 000025.0
Software BE Completed
Software FE Completed
Software MCU1: Not started
Software Dock: 2%
Software MCU3: Not started
Software upgrade will take 5 minutes
Do not switch off!
Package version: 000025.0
Software BE Completed
Software FE Completed
Software MCU1: 1%
Software Dock: Failed
Software MCU3:
g)The set will shut down automatically when the software upgrade
is completed.
Method 2: Update software from the internet
Note: To check for new updates, compare the current software
version of your home theater with the latest software version (if
available) on the Philips web site, and for BD-Live application and
software update, make sure that the network router has access to
the Internet and the firewall is disabled.
a) The "LAN" jack at the back panel of the set must be connect to
the network router via network cable and the set connect to TV,
Prepare the connection as shown follow:
2 - 1
b) Press " " <Home> button on R/C, and select <Setup>.
c) Select <Advance Setup> <Software Update> <Network>.
d) TV will show message as follow:
Now searching for upgrade software!
Please wait...!
Software updates for this player have been found. Do you want to
upgrade?
Cancel
e) Select <Start>, press <OK> button on R/C.
Software upgrade will take 5 minutes
Do not switch off!
Package version: 000025.0
Software BE 80%
Software FE Completed
Software MCU1:
Software Dock:
Software MCU3:
w w w
Start