Table of Contents
Advertisement
Mode name
Progressive initialization The progressive setting is initialized to
Interlace.
7.1.3.
Service Modes at a glance
Service mode setting: While the power is off, press REC, CH UP and OPEN / CLOSE simultaneously for five seconds.
Mode name
Release Items
Item of Service Mode executing is cancelled.
Error Code Display
Last Error Code of U/H/F held by Timer is
displayed on FL.
*Details are described in "7.1.1.
Diagnosis Functions".
ROM Version Display
1. Region code (displayed for 5 sec.)
2. Main firm version (displayed for 5 sec.)
3. Timer firm version (displayed for 5 sec.)
4. Drive firm version (displayed for 5 sec.)
5. ROM correction version (displayed for 5
sec.)
White Picture Output
White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive by
"I/P switch: [1] [4]"
Magenta Picture Output Magenta picture is output with Component
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive by
"I/P switch: [1] [4]"
Item
Description
Item
Description
FL display
The
display
before
leaves.
FL display
Self-
If any error history does not exist,
[F00] is displayed.
*Initial mode is "Interlace".
Switch Interlace/Progressive
*Initial mode is "Interlace".
Switch Interlace/Progressive
19
Key operation
Front Key
execution
When the power is on (E-E mode),
press
[STOP]
simultaneously for 5 seconds.
Key operation
(Remote controller key)
Press [0] [0] or [Return] in service
mode.
Press [0] [1] in service mode
Press [0] [2] in service mode
Press [1] [1] in service mode.
Press [1] [4] in White Picture Output
mode.
*I/P are switched alternately.
Press [1] [2] in service mode.
Press [1] [4] in Magenta Picture
Output mode.
*I/P are switched alternately.
DMR-EH57GN
and
[PLAY]
Advertisement
Table of Contents
