Table of Contents
Advertisement
Error Code
Diagnosis contents
HDD
[HDD ERR] is displayed when
ERROR
start up of HDD was failed.
(Except error of setting of
Power on Stand-by)
HDD NG
Power on Stand-by setting
error
7.1.2.
Special Modes Setting
Mode name
TEST Mode
*All the main unit´s parameters (include tuner)
are initialized.
Rating password
The audiovisual level setting password is
initialized to "Level 8".
Service Mode
Setting every kind of modes for servicing.
*Details are described in "7.1.3. Service
Mode at a glance".
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is ON,
execute " Forced disc eject " after releasing
Timer REC or EXT-LINK.
*This command is not effective during "Child
lock" is ON.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
Child lock/unlock
Set or release "Child Lock".
NTSC/PAL system select To switch PAL/NTSC altemately.
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
*When Timer REC is ON or EXT-LINK is ON,
execute "Forced Power-off" after releasing
Timer REC or EXT-LINK.
Description
a) When normal start up was failed.
b) When start up at HDD boot was failed.
c) When start up from state of P-OFF was
failed.
d) When start up from state of HDD SLEEP
was failed.
[HDD ERR] is displayed when above each
start up of HDD was failed.
*In case b), tray opens automatically and
[HDDERR] is displayed until version up disc is
inserted.
[HDD NG] is displayed when power on Stand-
by setting of HDD is NG or when HDD which
power on Stand-by is not set to is used.
Please try to replace HDD with junine HDD as
service parts.
Item
Description
Monitor Display
No display
No display
FL display
The
display
before
execution
leaves.
The
display
before
execution
leaves.
Display in P-off mode.
17
DMR-EH57GN
Automatic FL display
Key operation
Front Key
Press
[STOP],
[CH
UP]
[OPEN/CLOSE]
simultaneously for five seconds
when power is off.
Open the tray, set DRIVE SELECT
to DVD, and press [REC] and
[PLAY]
simultaneously
for
seconds.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
When the power is off, press
[STOP]
and
[CH
UP]
simultaneously for 5 seconds.
Press [ENTER] and [RETURN] by
remote
controller
simultaneously
until [X-HOLD] is displayed.
While the power is on (E-E mode),
press [STOP] and [OPEN/CLOSE]
simultaneously for 5 seconds.
Press [Power] key over than 10
seconds.
and
keys
5
keys
Advertisement
Table of Contents
