Advertisement
Reassigning Device Keys
®
You can use the One For All
Easy 5 to operate a second
TV or a second VCR or any combination of five home
entertainment components. For example, you may want
your One For All
®
Easy 5 to control 1 TV, 1 VCR and 3 audio
components; such as a CD Player, a Tuner and an Amplifier.
To accomplish this, you must reassign the CBL/SAT key to
operate the desired component, in this case, a third audio
component. The chart below shows you how to reassign a
particular device key and then set up your new
component.
TV to VCR/LD
SETUP* + 992 + VCR/LD + TV + TV +
SETUP* + VCR or Laser Disc code.
TV to CBL/SAT
SETUP* + 992 + CBL/SAT + TV + TV +
SETUP* + Cable or Satellite code.
TV to AUDIO 1
SETUP* + 992 + AUDIO 1 + TV + TV +
SETUP* + CD Player code.
TV to AUDIO 2
SETUP* + 992 + AUDIO 2 + TV + TV +
SETUP* + Receiver/Amplifier/Tuner
code.
VCR/LD to TV
SETUP* + 992 + TV + VCR/LD + VCR/LD
+ SETUP* + TV code.
VCR/LD to CBL/SAT
SETUP* + 992 + CBL/SAT + VCR/LD +
VCR/LD + SETUP* + Cable or Satellite
code.
VCR/LD to AUDIO 1
SETUP* + 992 + AUDIO 1 + VCR/LD +
VCR/LD + SETUP* + CD Player code.
VCR/LD to AUDIO 2
SETUP* + 992 + AUDIO 2 + VCR/LD +
VCR/LD + SETUP* + Receiver/
Amplifier/Tuner code.
CBL/SAT to TV
SETUP* + 992 + TV + CBL/SAT + CBL/
SAT + SETUP* + TV code.
CBL/SAT to VCR/LD
SETUP* + 992 + VCR/LD + CBL/SAT +
CBL/SAT + SETUP* + VCR or Laser Disc
code.
CBL/SAT to AUDIO 1 SETUP* + 992 + AUDIO 1 + CBL/SAT +
CBL/SAT + SETUP* + CD Player code.
CBL/SAT to AUDIO 2 SETUP* + 992 + AUDIO 2 + CBL/SAT +
CBL/SAT + SETUP* + Receiver/
Amplifier/Tuner code.
AUDIO 1 to TV
SETUP* + 992 + TV + AUDIO 1 + AUDIO
1 + SETUP* + TV code.
AUDIO 1 to VCR/LD SETUP* + 992 + VCR/LD + AUDIO 1 +
AUDIO 1 + SETUP* + VCR or Laser
Disc code.
AUDIO 1 to CBL/SAT
SETUP* + 992 + CBL/SAT + AUDIO 1 +
AUDIO 1 + SETUP* + Cable or
Satellite code.
AUDIO 1 to AUDIO 2 SETUP* + 992 + AUDIO 2 + AUDIO 1 +
AUDIO 1 + SETUP* + Receiver/
Amplifier/Tuner code.
AUDIO 2 to TV
SETUP* + 992 + TV + AUDIO 2 + AUDIO
2 + SETUP* + TV code.
AUDIO 2 to VCR/LD SETUP* + 992 + VCR/LD + AUDIO 2 +
AUDIO 2 + SETUP* + VCR or Laser
Disc code.
AUDIO 2 to CBL/SAT
SETUP* + 992 + CBL/SAT + AUDIO 2 +
AUDIO 2 + SETUP* + Cable or
Satellite code.
AUDIO 2 to AUDIO 1 SETUP* + 992 + AUDIO 1 + AUDIO 2 +
AUDIO 2 + SETUP* + CD Player code.
*NOTE: Here you must hold SETUP until the One For All
5 's red light blinks twice.
Using the Favorite Channel Key
Your One For All
®
Easy 5 is equipped with a favorite
channel key (FAV CH). You can set up the FAV CH key with
a list of up to 10 of your favorite channels for either your TV,
VCR, Cable Box, Satellite or DSS. Please note, the FAV CH
key can only be set up for one device key (TV, VCR/LD or
CBL/SAT) at a time. You cannot set up a favorite channel
list for another device key until you have cleared the FAV
CH key of your original list.
1 Press the device key (TV, VCR/LD, or CBL/SAT) for the
home entertainment component that will contain your
favorite channel list.
2 Press and hold SETUP until One For All
blinks twice. Release SETUP and press 9-9-6.
3 Enter the channel number of the first channel you
would like to add to your favorite channel list. Then
press SETUP .
• If you are entering a single digit channel number, you
must press 0 first.
• If you are entering a channel that is three digits long,
such as 103, you do not have to press SETUP after you
have entered the channel number.
• If your original remote control required you to use an
ENTER key to change channels, press ENTER instead of
SETUP after entering your channel number. For
example, if you want to add TV channel "4" to your
favorite channel list, you would: Press TV, then press and
hold SETUP until the One For All
®
blinks twice, then release SETUP and press 9-9-6. Press
0-4, followed by ENTER. Then, add your second
channel, followed by ENTER, and continue adding your
favorite channels until you have added the 10
channels you desire in your favorite channel list.
4 Continue adding your favorite channels, up to 10
channels. Once you have finished, press and hold SETUP
until the One For All
5 To scan through your favorite channel list, press FAV CH.
Your One For All
your favorite channel list, stopping at each channel for
three seconds.
6 To stop at one of your favorite channels, press any key
on the One For All
To clear an entire favorite channel list from the FAV CH key:
1 Press and hold SETUP until the One For All
light blinks twice, then release SETUP.
2 Press 9-9-6, then press and hold SETUP until the One For
®
All
Easy 5's red light blinks twice.
Using the Sleep Key
The SLEEP key allows you to access the sleep timer of your
TV or Cable Box. Even if your original TV or Cable Box
remote control did not have a sleep timer, your One For All
®
Easy 5 has its own built-in sleep timer. If your TV or Cable
Box has a sleep timer, press the SLEEP key to activate the
sleep timer. To activate the One For All
sleep timer:
1 Press the desired device key (TV or CBL), then press the
SLEEP key once to set the built-in sleep timer for 15
minutes.
2 Each additional press of the SLEEP key will add 15 more
minutes to the sleep timer, up to a maximum of 60
minutes.
NOTE: Once you have activated the One For All
built-in sleep timer, you must keep the remote pointed
directly at the component.
3. To deactivate the built-in sleep timer, press any key
other than SLEEP.
®
Easy
®
Easy 5's red light
Easy 5's red light
®
Easy 5's red light blinks twice.
®
Easy 5 will automatically scan through
®
Easy 5 .
®
Easy 5's red
®
Easy 5's built-in
®
Easy 5's
Troubleshooting
Problem
Solution
Red light not blinking
Replace the batteries with four (4)
when you press a key?
new AAA alkaline batteries.
The red light blinks
Make sure you are aiming your
®
when you press a key
One For All
but you receive no
entertainment component and
response from your
that you are within 15 feet of the
home entertainment
component you are trying to
component ?
operate before using your remote.
The One For All
®
Easy
Try all the codes listed for your
5 does not operate
home entertainment component
your home
in the "Set-Up Codes" section.
entertainment
Many set-up codes may allow for
component or is not
partial functionality, however, only
performing commands
one set-up code will operate your
properly.
home entertainment component
properly. Make sure that all of the
components you are setting up
can be operated with an infrared
remote control.
Problems program-
Use the VCR set-up codes for your
ming a TV/VCR
brand. Some combo units may
combo?
require both a TV code to control
volume and a VCR code for full
operation.
VCR not recording?
As a safety feature on the One For
All
®
Easy 5 , you must press the REC
key twice.
No volume on a 2nd
Press and hold SETUP until the One
TV?
For All
®
Easy 5's red light blinks
twice. Release SETUP and enter 9-
9-3 followed by VOL +.
If the One For All
Problems program-
ming the AUDIO 2 key?
does not blink twice after entering
your Receiver/Amplifier/Tuner
code, press and hold SETUP until
the One For All
blinks twice. Release SETUP and
press 9-9-2 followed by AUDIO 2
and then AUDIO 2 again. AUDIO 2
is now ready to accept Receiver/
Amplifier/Tuner codes.
Channel +/- and
Due to RCA design (1983-1987),
RECALL not working for
only the original remote control
your RCA TV?
will operate these functions.
However, using the FAV CH key will
allow you to run through a list of
up to 10 of your favorite channels.
Problems changing
If your original remote control
channels?
required a ENTER keystroke when
changing channels, press the
ENTER key on the One For All
5 after you enter the channel
number.
Keypad scrambled?
Press and hold SETUP until the One
For All
®
Easy 5's r ed light blinks
twice. Release SETUP and enter
9-6-9.
One For All
®
is a trademark of Universal Electronics Inc.
Copyright 1996 by Universal Electronics Inc. No part of this
publication may be reproduced, transmitted, transcribed, stored
in any retrieval system, or translated to any language, in any
form or by any means, electronic, mechanical, magnetic,
optical, manual, or otherwise, without the prior written permission
of Universal Electronics Inc.
URC-5065 - One For All
®
Easy 5 W/Glow Keys
M4039
This product is discontinued and is no longer
supported
Easy 5 at your home
®
Easy 5's red light
®
Easy 5's red light
®
Easy
McK 2/98
Advertisement
